How-To

Set up wireless Internet – wifi configuration

Set up wireless (wifi) Internet router

View Internet Details

Follow these steps for wifi configuration to gain wireless Internet access.

Wireless Router Model: ZyXEL VSG-1432 VDSL2

1. Open a new browser window on your computer and enter 192.168.1.254 in the address bar.

2. Log in using the default username of 'admin' and password of 'telus'.

3. Click the OK button.

4. Click on "Wireless".

5. Click on "Basic Wireless Setup".

6. Enter a new wireless network name in the “Wireless Network Name (SSID)” field.

7. Type the new password in the password field (if requested).

1. Click on "Apply".

Note: Your computer should be hardwired to the router with an Ethernet cable when performing this task.

Wireless Router Model: Actiontec V1000H VDSL2

First, determine what firmware version you are on.

If

Then

There is a "Forgot Password" link under the password field

You are on version: 31.30L.57

There is NOT a "Forgot Password" link under the password field

You are on version: 31.30L.55

Follow the steps below for your firmware version.

Version 31.30L.57

1. Open a new browser window and enter 192.168.1.254 in the address bar.

2. Log in using the default username of 'admin'.

The default password will be your wireless router’s Serial Number. You will find the serial number on the sticker at the bottom of the gateway.

Version 31.30L.55

1. Open a new browser window and enter 192.168.1.254 in the address bar.

2. Log in using the default username of 'admin' and password of 'telus'.

3. Click the Login button.

4. Click the Wireless Setup tab.

1. Click the "enable" radio button so that Wireless radio is enabled.

2. Click the "enable" radio button so that SSID Broadcast is enabled.

3. Type your network name in the "SSID Name" field.

4. Select the security type from the Security drop down field.

· Select WPA type from the drop down.

· Select encryption type from the drop down.

· Select the "use custom key/Passphrase" radio button.

· Type your desired Wireless key

5. Click the Apply button.

Note: Your computer should be hardwired to the router with an Ethernet cable when performing this task.

How to do a factory reset

If the default passwords do not work, you will need to do a factory reset on the wireless router and try again.

Actiontec V1000H VDSL2

1. Locate the reset button on the back of the gateway next to the power button.

2. With a pen, key or paper clip, press and hold the reset button for 10 seconds. Then release the button.

3. The router will reboot.

ZyXEL VSG-1432 VDSL2

1. Find the reset switch on the back of the router.

2. Depress the reset switch for three seconds, the Ethernet LED lights will turn solid green.

3. The router will reboot.