Provisioning a Polycom Sound Station IP6000

You need to access Polycom Device Web Interface or Graphical User Interface (GUI). From the phone itself, get the Polycom’s IP address by following these steps:

Step 1:
Press the Menu button on the phone.

Step 2:
Press 2 (or select Status in the menu).

Step 3:
Press 2 again (or select Network in the menu).

Step 4:
Press 1 (or select TCP/IP Parameters in the menu)

Step 5:
Type the IP address displayed on the screen into an Internet browser on a computer within the same network as your phone.

NOTE: We use 10.4.111.4 as an example.



Step 6:
Click SIP in the top menu.



Step 7:
Enter your administrator User name and Password.



Step 8:
Enter the following information below:



Step 9:
Under Servers, look for Outbound Proxy.

Step 10:
Type in the Following Information in their respective fields:

• Address: sip10.ringcentral.com
• Port: 5090
• Transport: UDP only
• Local SIP Port: 5060 - 5090

Step 11:
Do not forget to click on Submit.

Step 12:
Click on Line.




Step 13:
Under Line 1, Look for Identification.

Step 14:
Type in the Following Information in their respective fields:

Address: the RingCentral Digital Line Phone Number
Auth User ID: Authorization ID
Authentication Password: Authorization ID

Step 15:
Under Line 1, Look for Server 1.

Step 16:
Type in the Following Information in their respective fields:

• Address: sip10.ringcentral.com
• Port: 5060
• Transport: UDP only
• Register: sip.ringcentral.com
• Callback mode: Contact
• Callback Contact: *86

Step 17:
Set the call backmode to Registration, and don’t forget to click on Submit.

You have now provisioned a Polycom Sound Station IP6000.